LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0340: Camshaft Position Sensor Circuit Malfunction >> Detection Condition

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

DTC is set when there is no input from Camshaft Position (CMP) sensor while MAF reading is more than 2.2 grams/sec. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition during first drive cycle. Pending code is not available. Freeze Frame Data is available and DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals