LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0090: Pressure Regulator Control Solenoid Valve Malfunction >> Detection Condition

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

DTC is set when PCM detects low or high input voltage from Pressure Regulator Control (PRC) solenoid valve. This is a Continuous Monitor (CM). MIL is illuminated when PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is available if PCM detects malfunction condition during first drive cycle. Freeze frame data is available. DTC is not stored in PCM memory.

scientia non olet · About LEMON Manuals