LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC 2009: Variable Tumble Control System Solenoid Valve Circuit - Low Input >> Detection Condition

Detection Condition

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

DTC is set when PCM detects low voltage input from Variable Tumble Control System (VTCS) solenoid valve when VTCS solenoid valve is off. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is available if PCM detects malfunction condition during first drive cycle. Freeze Frame Data is available and DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals