LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 347 (Drive Shaft) >> Joint Shaft Disassembly/Assembly [L3] >> Bearing Disassembly Note >> When the bearing remains on the shaft

When the bearing remains on the shaft

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bearing from the joint shaft using the SST 
    Fig 1: Removing Bearing From Joint Shaft Using SST
    G03644386Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals