LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Body Panels) >> Body Panels >> Hood >> Hood Adjustment >> Gap Adjustment

Gap Adjustment

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fender.
  2. Loosen the hood hinge installation bolts and reposition the hood.
    Fig 1: Loosening Hood Hinge Installation Bolts And Repositioning Hood
    G03161798Courtesy of MAZDA MOTORS CORP.
  3. Tighten the bolts.
  4. Verify that the gap between the hood and the body is within the specification.
Fig 2: Verifying Gap Between Hood And Body
G03161799Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals