Open Circuit Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the following circuit for open.
- Power circuit (VSS connector terminal A to main relay terminal D)
- Ground circuit (VSS connector terminal C to GND)
- If an open circuit or short circuit is found, repair the malfunctioning wiring harness.
- If there are no open or short circuits, perform the sensor rotor inspection. (See SENSOR ROTOR INSPECTION .)