Resistance Inspection (Off-vehicle)

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance of each solenoid valve individually.
- If not as specified, replace the solenoid valve.
Pressure Control Solenoid

Resistance: 2.4-7.3 ohms

Fig 1: Measuring Resistance Of Each Solenoid Valve Individually
Courtesy of MAZDA MOTORS CORP.

Shift Solenoid A, B, C

Resistance: 1.0-4.2 ohms

Fig 2: Measuring Resistance Of Each Solenoid Valve Individually
Courtesy of MAZDA MOTORS CORP.

Shift Solenoid D, E

Resistance: 10.9-26.2 ohms

Fig 3: Measuring Resistance Of Each Solenoid Valve Individually
Courtesy of MAZDA MOTORS CORP.