LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Automatic Transaxle - Service, Removal & Installation [FN4AEL]) >> Oil Cooler Flushing >> Power Flushing >> Inspecting Oil Lines & Clamps

Inspecting Oil Lines & Clamps

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Be sure to Inspect the lines (hoses/pipes) for cuts, crimps (pinched), cracks or any other damage before reusing them.
    • If any problems exist, replace hoses and/or pipes.
    CAUTION:
    • Always use new clamps when replacing hoses.