Inspection Of Operation
WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the IG SW from OFF to ON.NOTE:
- The O/D OFF indicator light flashes when any malfunction exists in the EC-AT system components.
- Verify that the O/D OFF indicator light is not illuminating.
- Depress the switch and verify that the O/D OFF indicator light illuminates.
- If the O/D OFF switch does not function, inspect the O/D OFF switch, and then inspect the terminal voltage of the O/D OFF indicator light.