Transaxle Removal Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the SST (engine support) and lean the engine toward the transaxle.
Support the transaxle on a jack.
WARNING:
- Do not allow the transaxle to fall from the jack.
Remove the transaxle mounting bolts.

Fig 1: Removing Transaxle Mounting Bolts
Courtesy of MAZDA MOTORS CORP.
Remove the transaxle.

Fig 2: Removing Transaxle
Courtesy of MAZDA MOTORS CORP.