LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Automatic Transaxle - Service, Removal & Installation [FN4AEL]) >> Automatic Transaxle (ATX) Removal/Installation >> No.4 Engine Mount Removal Note

No.4 Engine Mount Removal Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support the engine by using the SST  before removing the engine mounting member.
  2. Remove the No.4 engine mount.
    Fig 1: Removing No.4 Engine Mount
    G01914468Courtesy of MAZDA MOTORS CORP.