Pillar Antenna Installation
WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
- Tape the antenna plug to the antenna drain pipe.
- Pass the pillar antenna and antenna drain pipe through the A-pillar from the hole in the roof.
- Install the screws and install the roof antenna.
- Connect the antenna plug.
- Install the driver-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
- Connect the negative battery cable.