Door Speaker Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Remove the door speaker.
Inspect for resistance between the door speaker terminals using an ohmmeter.

Fig 1: Inspecting Door Speaker Resistance (1 Of 2)
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Door Speaker Resistance (2 Of 2)
Courtesy of MAZDA MOTORS CORP.
To verify that the speakers output sound, apply voltage to each speaker and release using a 1.5-V battery.
- If not as specified, replace the door speaker.