LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Washer System & Wiper System) >> Wiper And Washer Switch Removal/Installation

Wiper And Washer Switch Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Wiper And Washer Switch Removing Sequence Index
    G01915436Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing Sequence Of Wiper And Washer Switch
    G01915437Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals