LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Washer System & Wiper System) >> Windshield Wiper Link Removal/Installation

Windshield Wiper Link Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION  .)
  2. Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION .)
  3. Pry off the connection between the windshield wiper motor and windshield wiper link.
  4. Remove in the order indicated in the table.
    Fig 1: Windshield Wiper Link Removing Sequence Index
    G01915422Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing Sequence Of Windshield Wiper Link
    G01915423Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
  6. Adjust the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE ADJUSTMENT  .)