LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Washer System & Wiper System) >> Windshield Washer Nozzle Removal

Windshield Washer Nozzle Removal

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bonnet insulator.
  2. Disconnect the windshield washer hose to windshield washer nozzle.
  3. Remove the windshield washer nozzle using a 10 mm (0.4 in)  deep socket wrench from underneath the bonnet.
    Fig 1: Removing Windshield Washer Nozzle Using Deep Socket Wrench From Underneath Bonnet
    G01915444Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals