Rear Washer Motor Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION .)
Connect battery positive voltage to the terminal B and ground to the terminal A of the motor.
Verify that the rear washer motor operates.
- If the motor does not operate, replace the rear washer motor.
Fig 1: Inspecting Rear Washer Motor Operation
Courtesy of MAZDA MOTORS CORP.