Door Switch Inspection

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Remove the door switch. (See DOOR SWITCH REMOVAL/INSTALLATION .)
Inspect for continuity between the door switch terminal and a body ground using an ohmmeter.
- If not as specified, replace the door switch.
Fig 1: Door Switch Terminals Continuity Reference Chart
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Door Switch Circuit & Connector View
Courtesy of MAZDA MOTORS CORP.