Tire House Trim Removal/Installation: 5HB

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Lift up the rear seat cushion.
Remove the rear seat back.
Remove the rear scuff plate.
Remove the fasteners.
Pull the tire house trim forward, then remove the tire house trim.

Fig 1: Removing Tire House Trim (5HB)
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.