LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 305 (Interior Trim) >> Meter Hood Removal/Installation

Meter Hood Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the screws.
  2. Pull the meter hood toward you, then remove clips A and pins B from the dashboard.
    Fig 1: Removing Meter Hood
    G01915289Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.