Glove Compartment Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Bend the stoppers inward, then remove them.

Fig 1: Bending Stoppers Inward
Courtesy of MAZDA MOTORS CORP.
Pull the glove compartment toward you while pushing it downward (1), then remove clip A.
Slide the glove compartment toward driver's side door (2).

Fig 2: Sliding Glove Compartment Toward Driver'S Side Door
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.