LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 305 (Interior Trim) >> B-Pillar Lower Trim Removal

B-Pillar Lower Trim Removal

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Handling the side air bag sensor improperly can accidentally deploy the side air bag module, which may seriously injure you. Read AIR BAG SAFETY PRECAUTIONS before working around the B-pillar areas.
NOTE:
  • The side air bag sensor is located in the B-pillar.
  1. Disconnect the negative battery cable.
  2. Remove the front scuff plate.
  3. Remove the rear scuff plate.
  4. Pull the area marked A, then remove one side of the B-pillar lower trim.
    Fig 1: Removing One Side Of B-Pillar Lower Trim
    G01915297Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals