LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 305 (Interior Trim) >> B-Pillar Lower Trim Installation

B-Pillar Lower Trim Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Handling the side air bag sensor improperly can accidentally deploy the side air bag module, which may seriously injure you. Read AIR BAG SAFETY PRECAUTIONS before working around the B-pillar areas.
NOTE:
  • The side air bag sensor is located in the B-pillar.
  1. Disconnect the negative battery cable.
  2. Install the B-pillar lower trim to the B-pillar with setting 5-10 mm (0.20-0.39 in)  upward from its original installation place.
  3. Slide the B-pillar lower trim downward.
  4. Install the rear scuff plate.
  5. Install the front scuff plate.
scientia non olet · About LEMON Manuals