Rear Spoiler Removal (MAZDASPEED)
WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Disconnect the short cord of the high-mount brake light (solderless connector side).NOTE:
- The high-mount brake light is connected to the vehicle harness with a short cord. Since the connector cannot be disconnected, disconnect at the solderless connector.
- Remove the nuts, then remove the rear spoiler.