Liftgate Garnish Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Remove the liftgate key cylinder. (See LIFTGATE REMOVAL/INSTALLATION .)
Remove the bolts.

Fig 1: Removing Liftgate Garnish Bolts
Courtesy of MAZDA MOTORS CORP.
Disengage clip A using pliers.
Pull the liftgate garnish downward, then remove it.

Fig 2: Disengaging Liftgate Garnish Clip Using Pliers
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.