LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 304 (Exterior Trim) >> Front Flap Removal/Installation

Front Flap Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolts and fasteners.
  2. Remove the front flap.
  3. Install in the reverse order of removal.
    Fig 1: Removing Front Flap
    G01915235Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals