LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Glass/Windows/Mirrors) >> Power Window SUBSWITCH Removal/Installation >> Rear

Power Window SUBSWITCH Removal/Installation: Rear

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the tab by inserting a tape-wrapped, flathead screwdriver between the switch and the rear door trim.
  3. Disconnect the connector, and remove the power window subswitch.
    Fig 1: Identifying Components Of Power Window Subswitch - Rear
    G01915026Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.