Outside Mirror Glass Installation
WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
- Clean and degrease the adhesion surface of the mirror glass.
- Stick double-sided adhesive tape onto the back of the mirror glass.
- Warm up the frame using a hot air blower.
- Remove the paper backing from the double-sided adhesive tape on the back of the mirror glass.
- Insert the mirror glass into the frame, then press lightly on the glass to secure it.