Stay Damper Disposal
WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Sawing through the stay damper body can cause metal shavings and filings to fly out, causing injury to the eyes. Wear protective eye wear whenever sawing through a stay damper before discarding it.
NOTE:
- The gas in the stay damper is colorless, odorless, and non-toxic.
- Lay the stay damper flat.
- Saw through the stay damper body using a hacksaw.
- Allow the gas to escape from the stay damper.
- Discard the stay damper.