LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Doors And Liftgate) >> Front Door Removal/Installation >> Connector Removal Note

Connector Removal Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Push the rubber boot backward.
  2. Pull the pin up.
  3. Remove the rubber boot from the connector.
    Fig 1: Removing Connector (Front)
    G01914990Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals