LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Doors And Liftgate) >> Front Door Removal/Installation >> Connector Installation Note

Connector Installation Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the connector and the rubber boot.
  2. Push the pin down.
  3. Install the rubber boot on the body.
scientia non olet · About LEMON Manuals