Trunk Lid Adjustment
WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the gap between the trunk lid and the body panel.
- If not as specified, loosen the trunk lid hinge installation nuts and reposition the trunk lid.
Clearance
a: 3.3-5.3 mm {0.13-0.20 in}
b: -1.0-1.0 mm {-0.040-0.039 in}
c: 5.0-11.0 mm {0.20-0.43 in}
- Tighten the nuts.