LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Body Panels) >> Hood Adjustment >> Gap Adjustment

Gap Adjustment

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the bonnet installation bolts and reposition the bonnet.

    Tightening torque 

    18.6-28.4 N.m (13-20 ft.lbf) 

  2. Tighten the bolts.
    Fig 1: Identifying Bonnet Installation Bolts
    G01914964Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals