Fuel-Filler Lid Adjustment

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Measure the gap and height between the fuel-filler lid and the body.
- If not as specified, loosen the fuel-filler lid installation bolts, and reposition the fuel-filler lid.
Clearance

a: 2.1-4.1 mm {0.09-0.16 in}

b: 2.5-4.5 mm {0.10-0.17 in}

c: 2.5-4.5 mm {0.10-0.17 in}

d: 2.3-4.3 mm {0.10-0.16 in}

e: -0.5-1.5 mm {-0.020-0.059 in}

Fig 1: Measuring Gap And Height Between Fuelfiller Lid And Body
Courtesy of MAZDA MOTORS CORP.
Tighten the bolts.