LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Seat Belt System) >> Rear Seat Belt Removal/Installation >> 4SD

Rear Seat Belt Removal/Installation: 4SD

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear package trim.
  2. Remove the bolts, then remove the rear seat belt.
  3. Install in the reverse order of removal.
    Fig 1: Removing Rear Seat Belt (4SD)
    G01914873Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals