LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Seat Belt System) >> Rear Buckle Removal/Installation

Rear Buckle Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. For 4SD, remove the rear seat cushion. For 5HB, lift up the rear seat cushion.
  2. Remove the bolt, then remove the rear buckle.
  3. Install in the reverse order of removal.
    Fig 1: Removing Rear Buckle Bolt
    G01914879Courtesy of MAZDA MOTORS CORP.