LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 297 (Control System (HVAC)) >> Magnetic Clutch Disassembly/Assembly >> Stator and Thermal Protector Installation Note

Stator and Thermal Protector Installation Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply approximately 1 g {0.04 oz}  of silicone (Shin-Etsu Silicone KE- 347W or similar)
    Fig 1: Applying Silicone To Thermal Protector
    G01914712Courtesy of MAZDA MOTORS CORP.