LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Power Steering System) >> Steering Gear And Linkage Removal/Installation >> Engine Mount Member Removal Note

Engine Mount Member Removal Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the SSTs  as shown in the figure.
  2. Remove the engine mount member.
    Fig 1: Removing Engine Mount Member
    G01914568Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals