LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (Power Steering System) >> Pinion Shaft and Housing Component Disassembly Note >> Mounting Rubber Disassembly Note

Mounting Rubber Disassembly Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the mounting rubber out from the gear housing using the SSTs  and a press.
    Fig 1: Disassembling Mounting Rubber
    G01914581Courtesy of MAZDA MOTORS CORP.