Holder Disassembly Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Cut away the staked area using a drill.
CAUTION:
- Carefully pull the holder out without damaging the U-gasket.
Fig 1: Disassembling Holder (1 Of 2)
Courtesy of MAZDA MOTORS CORP.
Disassemble the holder using the SST.

Fig 2: Disassembling Holder (2 Of 2)
Courtesy of MAZDA MOTORS CORP.