LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 292 (Automatic Transaxle Shift Mechanism) >> Emergency Override Button Inspection [Sport At]

Emergency Override Button Inspection [Sport At]

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to OFF.
  2. Verify that the selector lever is in the P position.
  3. Without the brake pedal depressed, verify that the selector lever cannot be shifted from the P position.
  4. Remove the panel cover using a screwdriver as shown.
  5. Insert the screwdriver into the emergency override hole and push down. Verify that the selector lever can be shifted from P position.
    • If not as specified, inspect or repair if necessary.
      Fig 1: Removing Panel Cover Using Screwdriver
      G01914517Courtesy of MAZDA MOTORS CORP.