LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 291 (Manual Transaxle Clutch) >> Clutch Unit Removal/Installation >> Pilot Bearing Removal Note

Pilot Bearing Removal Note

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The pilot bearing does not need to be removed unless you are replacing it.
  1. Use the SSTs  to remove the pilot bearing.
    Fig 1: Removing Pilot Bearing
    G01914344Courtesy of MAZDA MOTORS CORP.