Flywheel Removal Note

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Hold the flywheel using the SST.
Remove the bolts evenly and gradually in the pattern shown.
Remove the flywheel.
Inspect for oil leakage from the crankshaft rear oil seal.
- If there is any such leakage or if the oil seal is damaged, replace the crankshaft rear oil seal.
  
  Fig 1: Holding Flywheel Using SST
  Courtesy of MAZDA MOTORS CORP.