Flywheel Installation Note
WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
- Install the flywheel to the crankshaft.
- Hand-tighten the flywheel installation bolts.
- Install the SST
to the flywheel.
- Tighten the flywheel installation bolts in the pattern shown.
Tightening torque
97-102 N.m (70.9-75.9 ft.lbf)
Courtesy of MAZDA MOTORS CORP.