LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 291 (Manual Transaxle Clutch) >> Clutch Master Cylinder Removal/Installation

Clutch Master Cylinder Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda Protege5, 2003 Mazda Protege, 2002 Mazda Protege5, and 2002 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery and battery cover.
    CAUTION:
    • Clutch fluid will damage painted surfaces. Be sure to use a container or rags to collect it. If fluid does get on a painted surface, wipe it off immediately with a rag.
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
    Fig 1: Removing Procedure Clutch Master Cylinder
    G01914334Courtesy of MAZDA MOTORS CORP.