LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (Drive Shaft) >> Joint Shaft Disassembly/Assembly >> Dust Seal (right) Assembly Note

Dust Seal (right) Assembly Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease to a new dust seal lip.
  2. Install the new right side dust seal using the SSTs. 
    Fig 1: Installing New Right Side Dust Seal Using SST
    G01913990Courtesy of MAZDA MOTORS CORP.