LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (Drive Shaft) >> Joint Shaft Disassembly/Assembly >> Bearing Assembly Note

Bearing Assembly Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new bearing using the SSTs. 
    Fig 1: Installing New Bearing Using SST
    G01913991Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals