LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (Drive Shaft) >> Drive Shaft (ZM, FS ATX, FS MTX Right Side And FS With TC Right Side) Disassembly/Assembly >> Outer Ring Disassembly Note

Outer Ring Disassembly Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark the outer ring and the shaft for proper assembly.
  2. Remove the outer ring.
    Fig 1: Marking Outer Ring And Shaft
    G01914007Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals