LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 288 (Drive Shaft) >> Drive Shaft (ZM, FS ATX, FS MTX Right Side And FS With TC Right Side) Disassembly/Assembly >> Dynamic Damper Assembly Note

Dynamic Damper Assembly Note

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the dynamic damper as shown in the figure.

    Standard length 

    292-298 mm (11.5-11.7 in) 

    Fig 1: Installing Dynamic Damper
    G01914012Courtesy of MAZDA MOTORS CORP.
  2. Install the new boot band onto the dynamic damper.