Total Toe-in Adjustment

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the cam nut on the lateral link.
Turn the adjusting cam bolt as indicated to adjust the toe-in.

Fig 1: Toe-In Adjustment Chart
Courtesy of MAZDA MOTORS CORP.
NOTE:
- Turning the adjusting cam bolt one complete turn changes the toe-in about 3.0 mm (0.12 in) (0°18').
Fig 2: Turning The Adjusting Cam Bolt
Courtesy of MAZDA MOTORS CORP.
Tighten the cam nut.
Tightening torque

50-69 N.m (37-50 ft.lbf)